Transient Strain

The concrete transient strain at elevated temperatures can be estimated using the tool shown below.

For additional information, please refer to:

Terro MJ. Numerical Modeling of the Behavior of Concrete Structures in Fire. ACI Struct J 1998; 95(2): 183-93.

Youssef M.A. and Moftah M., 2007, “General Stress-Strain Relationship for Concrete at Elevated Temperatures”, Engineering Structures, 29(10): 2618-2634. 

A general stress-strain relationship for concrete when subjected to fire is needed as it allows designing concrete structures to specific fire-performance criteria and improves the understanding of the behaviour of these structures during fire events. Existing relationships are developed based on fire tests of unconfined concrete specimens. They provide significantly different predictions because of uniqueness of each relationship and the existence of numerous formulations for calculating the governing parameters. In this paper, available formulations for estimating the parameters affecting the behaviour of unconfined and confined concrete are presented. These parameters are concrete compressive strength, concrete tensile strength, concrete compressive strain at peak stress, initial modulus of elasticity of concrete, transient creep strain, thermal strain, and yield stress and bond strength of reinforcing bars. Recommendations for choosing specific formulations are made based on accuracy, generality, and simplicity. Suitable compressive and tensile stress-strain relationships at elevated temperature that utilize the recommended formulations are proposed based on well-established relationships for confined concrete at ambient temperature. The proposed relationships are compared to existing ones and available experimental data. They can capture changes in the mechanical properties of concrete resulting from temperature and confinement and are found to be superior to existing relationships. However, additional tests are needed to further validate and improve the proposed relationships.



Simplex Engineering Inc. cannot be held liable for actual designs that follow information presented on this site. The design engineer must adhere to the rules governing practicing of professional engineering and follow the requirements of prevailing design standards, regulations, and codes of practice. Simplex Engineering Inc. will be delighted to discuss potential collaborations in structural engineering related projects. Please contact us to be informed about our services and associated fees.